Evening, option B, Slatted centre. The planted planter on a patio at dusk under warm festoon lights, a lit window and brick wall behind, the larch rim glowing above the charcoal boards and the slatted middle panel.

← the floor Charcoal Planter Build Plan/build order·if / 076

Fit the tie rods

Two M10 stainless rods through the mid posts at 400mm, nuts let into counterbores.

The card

build order 04 of 11

Fit the tie rods

build order 04 of 11idea_076

The notes

rendered

At each mid post, drill a 12mm hole straight through both sides at 400mm high. Counterbore the outside faces with a 25mm bit, 12mm deep, so the nut sits below the surface. Fit the rod with a penny washer and nut at each end, and tighten until it’s snug.